- Manganese Brass
- 2017-12-23 11:18
- Manganese brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well cleaned before brazing.The fluxes
- Tin Bearing Silver Phoscopper Brazing Alloy
- 2017-12-20 16:37
- tin bearing silver phoscopper brazing alloy The product is used for brazing of copper and copper alloys. It has a lower melting point, excellent fluidity, good brazing properties. The brazing joint has high mechanical strength and smooth surface. Flux is
- Silicon Brass
- 2017-12-18 04:55
- Silicon brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should
- Silver-copper-nickel Brazing Alloys
- 2017-12-12 18:42
- silver-copper-nickel brazing alloys is a kind of silver-based solid solution. It has good properties such as high mechanical strength, good plasticity and electrical conductivity. It is applied to the brazing of ferrous metals and non-ferrous metals, such
- Copper Nickel Alloys
- 2017-12-09 17:37
- Copper Nickel Alloysis applied to the brazing of stainless steel,hard alloys such as tungsten, molybdenum, iron, kovar, nickel etc, applied widely in the industries of machinery, electromechanical, refrigeration, automobile and bicycle etc.
- Bronze Brazing Paste
- 2017-11-16 08:33
- After the preparation of bronze brazer into powder, make the powder into paste.It is suitable for narrow gap and automatic brazing of complex components, and easy to use. It can save the dosage. Product is suitable for brazing copper, bronze and steel, et
- Silicon Bronze Brazing Alloy
- 2017-11-07 07:45
- Tin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The surface is bright and clean
- Low-silver Copper Phosphorus Brazing Alloy
- 2017-10-14 16:10
- The product is used for brazing of copper and copper alloys. It has low melting point, excellent fluidity, good brazing properties. The brazing joint has high mechanical strength and smooth surface. Flux is unnecessary when brazing copper.
- Silver-copper-tin Brazing Alloys
- 2017-09-26 16:57
- Silver-copper-tin brazing alloys is a kind of silver-based solid solution. It has goodproperties such as excellent wettability and ability to fill the clearances, good plasticity and electrical conductivity.
- Vacuum Brazing Paste
- 2017-09-20 05:45
- Vacuum brazing alloy can be made into paste. Metal powder in the paste including BVAg-8,BVAg-8b,etc. It is suitable for narrow gap and automatic brazing of complex components, and easy to use. It cansave the dosage，and be used in vacuum atmosphere with hi
- Aluminum Brazing Alloy
- 2017-09-10 02:18
- Aluminum alloys solder is applied for joinning aluminum to aluminum alloys, or some aluminum solders can be used for joinning aluminum to copper. It is not suitable for joinning other metals as the oxide on the surface of aluminum solder is difficult to b
- Nickel Bronze Brazing Alloy
- 2017-09-03 07:17
- Nickel bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The strength of joint is hig
- Copper Aluminium Alloy
- 2017-08-23 06:40
- copper aluminium alloy can be used for brazing copper and other alloys, meet the special requirements of customers.
- Sn-Ag Solder
- 2017-08-23 02:26
- Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta
- Pure Copper Solder
- 2017-08-20 13:30
- Pure Copper brazer is applied to the brazing of stainless steel,hard alloys such as tungsten, molybdenum, iron, kovar, nickel etc, applied widely in the industries of machinery, electromechanical, refrigeration, automobile and bicycle etc.
- Silver Paste
- 2017-08-14 04:46
- After the preparation of silver brazer into powder, make the powder into paste.It is suitable for narrow gap and automatic brazing of complex components, and easy to use. It can save the dosage。The product can be used to complex structure, with higher bra
- Flux Coating Silver Brazing Alloy
- 2017-08-01 04:14
- The silver brazing alloy can be made into flux coating brazing alloy. Flux coating silver brazing alloy is applicable to automatic brazing. It need not coating flux, can has higher production efficiency, saves the material consumption.
- Tobin Bronze Brazing Alloy
- 2017-07-28 13:05
- Tobin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used.
- Pure Silver Solder
- 2017-07-20 11:21
- Silver silver solder has good process performance, high purity, brazing performance is good, can be processed into a variety of forms. It can be used for brazing copper and copper alloy, steel and stainless steel, etc.
- Brass Solder
- 2017-07-11 04:26
- Brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well
